Foshan Guangteng New Energy Co., Ltd. has been committed to the
development, production, marketing and after-sales service
of heat pump since founded in 2003,
and granted as credit business enterprise by Chinese Government.
With heat pumps the water is heated by means of air drawn from the room,
the heat pump will simultaneously cool down the room and provide hot water to cover all your daily needs.
Up to 70 per cent of the energy required for operation is drawn from the air.
The heat pump is by all means the most energy efficient and cost effective way of water heating!
Guangteng has developed a product, that saves money and contributes to a cleaner environment.
An air source heat pump (ASHP) is a system which transfers heat from outside to inside a building, or vice versa.
Under the principles of vapor compression refrigeration, an ASHP uses a refrigerant system involving a compressor and a condenser to absorb heat at one place and release it at another.
They can be used as a space heater or cooler, and are sometimes called "reverse-cycle air conditioners".
In domestic heating use, an ASHP absorbs heat from outside air and releases it inside the building, as hot air,
hot water-filled radiators, underfloor heating and/or domestic hot water supply.
The same system can often do the reverse in summer, cooling the inside of the house.
When correctly specified, an ASHP can offer a full central heating solution and domestic hot water up to 80 °C.
The EVI split heat pump is mainly used at low temperature area, heat pump with split indoor unit and outdoor unit,
the main component in outdoor unit are compressor, evaporator, fan, expansion valve,
gas-liquid seprator etc. The indoor unit contains condensor, water pump, reservoir, there are two copper pipes connect two units;
EVI heat pump is especially for the ambient temperature above -25℃,
heat pump with cooling, heating and hot water function, supply 30~60℃hot water and 5~30℃ cold water.
1. High efficiency compressor: Copeland scroll compressor
2. Electronic expansion valve: Refrigerant flow control accurate.
3. Evaporator: Using surface modification of hydrophilic aluminous foil, inside thread copper.
4. Cabinet: galvanized steel
5. Condenser: commerical heat pump use brazed plate heat exchanger .
6. New lattice LCD wire controller
7. Four way valve reverse defrosting
8. Supply hot water all day long
9. High Efficency, higher water temperature output up to 60℃.
10.The outdoor temperature operating limites from -15 ℃ to +43 ℃.
Safety Protecting System
(1)High and low pressure protection
(3)High temperature protection
(7)Lack of phase
(8)Separation of water and electricity
Components and Suppliers
(1)We use the components of world famous or Chinese famous brands to make sure the good quality heat pump for best performance and long time uselife.
(2)All the components will be second tested by our Quality Control Department.
(3)The components brand is optional.
Heat Pump Technology
The sun gives many energy to the earth, most of the energy are stored in air, water and ground. Heap pump water heater is a device that transfers heat from natural heat sources in the surroundings, such as the air, ground or water and move it into your home. This is different from a gas or oil furnace, because they don’t actually produce any heat by burning fuel .Although heat pump water heater needs electricity in order to drive the device to transfer heat, so it can save much energy consumption than gas heater, electric heater and fuel boiler, heat pump water heater can produce up to four times more energy than they use during operation. This heat can be used in a central heating system, under floor heating, sanitary hot water. Heat pump system lower CO2 emissions than a oil, gas, LPG boiler, that’s a great contribution to the fight against climate change.
Heat Pump Advantage
About Our Factory
GuangTeng Solar Energy Electrical Appliance Co., Ltd has been committed to the development, production, marketing and after-sales service of heat pump water heaters since founded in 2003, and granted as credit business enterprise by China Government.
Our factory locates in Shunde,China, with10000 square meters of production workshop, modern production equipments, experienced management and development teams. We carry out ISO9001 quality control system to ensure that providing top quality products and service to our customers, quality permeate into every detail of products. So far our partners throughout Europe,Australia, Africa, Middle East, South America and etc.
We have done hundreds projects of commercial using heat pumps,and OEM for some famous brands in China.
(1)Offer OEM service.
(2)Make customized heat pump according to customer's requirement.
Heating at air temperature 7/6℃ , water temperature 30/35 ℃
Heating at air temperature 2/1℃ , water temperature 30/35 ℃
Heating at air temperature 7/6℃ , water temperature 40/45 ℃