How to maintenance heat pump hot water system in winter

Winter to do a good job of maintenance machine related can ensure that it can provide you with a winter warm boiled water.
if you don't need the kitchen air conditioning wind will air exhaust to the outside. Specific operation method is as follows. Please send mode setting of the machine in the standard heating mode. Usually used in winter bath water temperature for 53℃, at this time recommend to set the goal of air condition and heat pump temperature of 63 ℃, so can not only ensure the comfort of hot water, and can meet the demand of hot water supply.
Check the air inlet for the leaves sundry 
Please check whether the air inlet unimpeded, if it is found that air inlet have leaves or other stuff please keep clear of in time, in order to ensure the normal operation of the machine.
Suggest user 4-7 month to pull the valve handle regularly. 4-5 times in a row, each time for about 5 seconds to ensure that the body can normal pressure.
To choose heat pump hot water system boot time
Air source water heater is by absorbing heat from the air heating. Therefore, the user can according to the local temperature changes, choose the best time to boot operation to reduce power consumption. Generally speaking, in the winter, the highest temperature during the 21 to 36 points at noon, then start the air can water heater heating can shorten the heating time, reduce power consumption.
hot water faucet to provide hot water at the same time
If users in the use of hot water, hot water faucet in the condition of the hot and cold should pay attention to whether multiple hot water faucet to provide hot water at the same time. On the premise of tap water supply pressure is constant, a hot water hot and cold conditions. If there is no open at the same time more hot water faucet. One-way valve damage also blows hot and cold hot water could be happening, change the one way valve can be repaired.